How To Replace Awning Fabric
SunSetter retractable awnings are built to last. The frame brackets, bars, and arm clamps are made with high-quality aluminum with a baked-on enamel finish that never rusts or needs painting. And the fabrics used to construct the awnings are world class, providing years of reliable performance.
All it takes to change your awning fabric is:
• You
• A helper
• Phillips Screwdriver
• Ladder
Got those items? Let’s get started.
A Simple Process
The process begins by contacting SunSetter to order your new awning fabric. Visit SunSetter.com or call 1-800-876-2340 to get things started.
The replacement process involves opening the awning. If you have an aluminum hood, your first step is removing the hood end plate opposite the side of the motor or gear assembly. The second step is using the manual crank to unroll the fabric to reveal the fabric slot in the roller bar. Next, remove the two or three screws from the end plate of the front bar. Then, with your helper, pull the fabric out of both the roller bar and the front bar at the same time. Finally, once the fabric is removed, the new fabric can be inserted into the roller bar and front bar at the same time. This is best done in small steps, alternating from one bar to the other. After the fabric is completely inserted, put the hood end plate back on. After that, use the manual crank to slowly roll the fabric onto the roller bar—the fabric should roll over the top onto the roller bar.
Those are the basic steps. Find the complete details for changing your manual, motorized and motorized PRO awning fabric here.
If you’re replacing the fabric on a Platinum Plus semi-cassette awning, you’ll also need a 6mm Allen wrench to execute a few additional steps. You can find complete Platinum Plus semi-cassette awning fabric replacement instructions here.